Difference between revisions of "LinkSprite DIY 3D printer Prusa i3 Assembled Version with Laser Engraving Function"

From LinkSprite Playgound
Jump to: navigation, search
Line 6: Line 6:
 
[[File:3D printer with Laser Function.jpg|400px]]
 
[[File:3D printer with Laser Function.jpg|400px]]
  
=Specification=
+
== Specification ==
 
*1.Print size 20x 20x 20 cm
 
*1.Print size 20x 20x 20 cm
 
*2.LCD display, SD card offline printing
 
*2.LCD display, SD card offline printing
Line 14: Line 14:
 
*6. Working Area of 3D printer: X: 200cm Y: 200cm Z: 200cm
 
*6. Working Area of 3D printer: X: 200cm Y: 200cm Z: 200cm
  
 +
== Document ==
  
 
[https://s3.amazonaws.com/cutedigi/3DPrinter/Firmware+for+3D+printer+with+laser+engrave.rar 3D printer with laser engraving function]
 
[https://s3.amazonaws.com/cutedigi/3DPrinter/Firmware+for+3D+printer+with+laser+engrave.rar 3D printer with laser engraving function]

Revision as of 08:06, 11 August 2017

Introduction

The 3D printer uses the SD card to print offline. Generates the STL file by the 3D modeling software. Slice to gcode files through the Cura and copy to SD card, and insert into the 3D printer. The 3D printer could be operated according to the instructions on the screen.


3D printer with Laser Function.jpg

Specification

  • 1.Print size 20x 20x 20 cm
  • 2.LCD display, SD card offline printing
  • 3.Print accuracy 0.1mm
  • 4.Size of consumptive material:1.75mm
  • 5.Consumables materials for printing:PLA, ABS, PETPLA, ABS, PET, HIPS, Wood grain PLA, nylon...
  • 6. Working Area of 3D printer: X: 200cm Y: 200cm Z: 200cm

Document

3D printer with laser engraving function