The LoL Shield is a charlieplexed LED matrix for the Arduino. The LEDs are individually addressable, so you can use it to display anything in a 9×14 grid. Scroll text, play games, display images, or anything else you want to do. Since this is a shield, you will need an Arduino for this project. The LoL Shield is just a board with LEDs and headers on it, so you need something to control them. Once you have the Arduino, it’s as simple as downloading the LoL Shield Library and programming something fun. The library takes care of the complicated mess of driving a charliplexed display, so you just need to set x and y coordinates to on or off. If you would like to set animations manually you can download the ODS file here.
Note: This is a kit and soldering is required.
- 1 × LoL Shield PCB
- 126× 3mm LED Green
- 1 × 2.54MM Spacing 1*40P Single Row Female Needle [IT_SIRWNE2.54MM_1X40P] [GA101101]
- 126 individually controlled red LEDs
- Great DIY solder project
- Arduino compatible
How to buy
here to buy LoL Shield on store