RB-150CS: Servo with 360 Degree freedom
- Control System: +Pulse Width Control 1500usec Neutral
- Operating Voltage: 4.8-7.2 Volts
- Operating Temperature Range: 0 to +60 Degree
- Operating Speed (4.8V): 0.16sec/60° at no load
- Operating Speed (6V): 0.14sec/60° at no load
- Operating Speed (7.2V): 0.12sec/60° at no load
- Stall Torque:(4.8V): 3kg·cm ;(6.0V): 3.5kg·cm
- Dead Band Width: 10usecConnector Wire Length: 300mm
- Dimensions: 40.8mm X 20.1mm X 38mm
- Weight: 56g
- location of each pin: red (+),brown (-), yellow (signal)
Servo has three wires: Brown, Red and Orange. Brown is GND, Red is VCC, and should be connected to +5V, Orange is the control signal, which is PWM signal.
Note: Don't power your servo from USB port as USB port cannot provide enough current.