Starter Kit for Arduino ---Beginner Full Package
Introduction
This is a starter kit for Arduino beginner.
Package List
- 1 x Cuteduino: An Arduino Uno R3 compatible board.[MP_CDUNO][102201008]
- 1 x USB A to B cable
- 1 x Mini Breadboard[PRT_MINIBRD_WHITE][130201001]
- 65 x Male to male jumper wire: These are high quality wires that allow you to connect the female headers on the Arduino to the components and breadboard. 40 4" wires, 10 6", and 10 9" wires.
- 2 x Tri-Color LED: Because everyone loves a blinky. Use this LED to PWM mix any color you need.[IT_LED_TRPLE_RGB5MM] [DA201102]
- 2 x Red LEDs: Light emitting diodes make great general indicators.[IT_LEDRED5MM_FL17MM] [DB101102]
- 2 x Green LEDs:Light emitting diodes make great general indicators[IT_LEDGRE5MM_FL17MM] [DB101103]
- 2 x Blue LEDs: Light emitting diodes make great general indicators.[IT_LEDBLU5MM_FL17MM] [DB101104]
- 2 x Buttons: To interface with outside world[IT_TOUSU_6X6X5MM] [IA101101]
- 2 x Photocell: - A sensor to detect ambient light. Perfect for detecting when a drawer is opened or when night-time approaches.[IT_KIT_SENPACK_COM_LDR][EA101102]
- 2 x Thermistor - A sensor for detecting ambient temperature and temperature changes. 10K thermistor with a negative temperature coefficient.[IT_KIT_SENPACK_COM_TMP36][EA101103]
- 2 x Potentiometer: 2 adjustable 10K ohm potentiometer can be used to do ADC input experiments.[IT_RVO9_POT10K] [WG101101]
- 5 x 300 Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.[IT_RESE300Ω][HA101106]
- 5 x 1k Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.[IT_RESE1K][HA101104]
- 5 x 5K Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.[IT_RESE5K][HA101105]
- 1 x Buzzer[IT_KIT_SENPACK_COM_BUZZER][EA101104]
