UHF RFID tag, EPC Gen2 (900MHz)

From LinkSprite Playgound
Jump to: navigation, search

Introduction

This LS0831 Passive RFID Tag works with all LinkSprite UHF RFID tag reader/writer.

The passive RFID tag uses frequency hopping technique. User can deign their own read/write protocol. The read/write distance is over 10M depending on the reader/writer. It has a memory of 1024 bits, unique 64 bit ID. Wide working frequencies range. Support read/write multiple tag at once (up to 50 tags/per second), and doesn't impacted by the number of tags present in the effective zone. A memory of 928 bits are supplied for user to write/read/erase. The memory can be written over 100,000 times with a lift time longer than 10 years.


  • No battery needed
  • The read/write distance is longer than 10M
  • Fast read/write
  • PVC or PET plastic substrate
  • Mutiple tags be read/written at same time

model: RFID_UHF_CARDTAG_LS0831

Rfid cardtag.jpg

Specification

Frequencies 920-925MHz, 902-928Mhz, User specified hopping frequecies
Protocols ISO18000-6B, ISO18000-6C (EPC GEN2
Distance 10M
EEPROM 1024 bits, while 96 bits are used as ID and reserved factory data
Programmable EEPROM 928 bits
Substrate PVC or PET
Tag Read/Write Read speed: 32 bits in 1.4ms; Write speed: 32 bits in 30ms
Anti-collision use anti-collision protocol; Not impacted by number of tags in effective zone; 50 tags in one second
Temperature Working temperature: -40C- 64C; Store temperatureL -55C-100C
Size 86(H)*55(W)*2(T)mm