Vibration Sensor Module

From LinkSprite Playgound
Jump to: navigation, search


Spring based vibration sensor module of Linker Kit uses a spring based sensor. When there is vibration, it will output a digital signal.

Linker vibration.jpg

Spring Based Vibration Sensor

SW-18010P series are spring type, no directional vibration sensor trigger switch, any angle can trigger.

Switch is open circuit OFF-state , when it is static, when external force to touch and corresponding vibration, or movement speed achieve adequate (partial) centrifugal force, conductive pick feet will produce instant conductivity is instant ON-state, when external force disappear, switch back to open circuit OFF-state.

Switch have the identification P at the bottom, for completely airtight;

In the normal,switch life can reach 20,0000 cycles lifespan

This series Switches have trigger high sensitivity

Electrical characteristics

  • Voltage: <12V
  • Current: <20mA
  • Conductive time: 2ms
  • Closed resistance: <30 ohm
  • Open resistance: >10M ohm

Mechanical characteristics

  • Temperature range: Storage: -40°C to 80°C, Operating: -40°C to 80°C
  • Pull force of terminal: 500gf for 1 minute
  • Humidity: 95% RH, 40°C for 96 hours
  • Operating lifespan: 100,000 cycles