Difference between revisions of "10mm Green LED Module"

From LinkSprite Playgound
Jump to: navigation, search
(Schematics)
Line 4: Line 4:
  
 
[[File:LED10MM G.jpg | 400px]]
 
[[File:LED10MM G.jpg | 400px]]
 +
 +
== Features ==
 +
 +
Dimensions: 25.5×24.5×23.5mm
 +
 +
Net weight: 3g
  
 
== Schematics ==
 
== Schematics ==

Revision as of 02:58, 10 June 2014

Introduction

Linker LED Module is designed for the beginners of Arduino/pcDuino to monitor controls from digital ports. It can be mounted to the surface of your box or desk easily and used as pilot lamp for power or signal. Its brightness can be adjust by potentiometer.

400px

Features

Dimensions: 25.5×24.5×23.5mm

Net weight: 3g

Schematics

Application Ideas

test <syntaxhighlight lang="c"> /*

 Blink
 Turns on an LED on for one second, then off for one second, repeatedly.

 This example code is in the public domain.
*/

void setup() {

 // initialize the digital pin as an output.
 pinMode(13, OUTPUT);     

}

void loop() {

 digitalWrite(13, HIGH);   // set the LED on
 delay(1000);              // wait for a second
 digitalWrite(13, LOW);    // set the LED off
 delay(1000);              // wait for a second

} </syntaxhighlight>

10mm green on.jpg