Base Shield

From LinkSprite Playgound
Revision as of 07:45, 30 May 2016 by Alvin (talk | contribs) (Introduction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

This is the sensor base shield of Linker kit. It can accept the connection of various modules of Linker kit.

This shield can be used with Arduino/pcDuino.

N05DH WITHOUT PACKAGED FRONT.jpg

N05DH WITHOUT PACKAGED BACK.jpg

Features

  • Dimension:69×59×19mm
  • Weight: 26g

Schematics

Pin Definition

Please note that when connecting to analog or digital sockets. Each socket contains 5V, GND, and two I/O pin connections. For example, both J21 and J22 have D2, they have wire connection on PCB board.

Base pin.jpg

How to buy

Here to buy Base Shield on store