Diamondback WiFi Platform Compatible With Arduino

From LinkSprite Playgound
Revision as of 06:02, 10 January 2013 by Nancy (talk | contribs) (Introduction)
Jump to: navigation, search

Introduction

The DiamondBack is an Arduino Duemilanove compatible clone that has 802.11b wireless connectivity baked directly onto the board. The components have been switched out for surface mount equivalents to free up space for the wireless module. It is fully compatible with the Processing/Wiring IDE. The DiamondBack will give your Arduino projects added wireless connectivity without the need for additional bulky shields!

Diamondback use low consumption MRF24WB0MA embedded Wi-Fi Transceiver Module,match 2.4 GHz IEEE 802.11b™ RF Standard. At the same time, Diamondback guide out all the I/O interface of ATmega328, such that support user development.

Features

  • size compatible with existing Arduino Uno, Duemilanove and Diecimila boards
  • up to 14 digital I/O pins
  • 6 analog input pins
  • Atmel Mega 328P microprocessor
  • 32KB flash RAM (2KB used for bootloader)
  • 2KB SRAM
  • 1KB EEPROM
  • lower profile USB 5-pin mini-B connector
  • auto-switchable power between USB and external DC power
  • 2-pin JST connector allows for more varied external power options (JST to DC barrel jack, Litihium-ion battery pack, etc.)
  • 802.11b 1 and 2 mbps wireless connectivity
  • on-board PCB antenna
  • switchable interrupt between INT0 and digital pin 8
  • supports infrastructure mode (BSS) and adhoc (IBSS) network modes
  • support for WEP, WPA, and WPA2 security
  • LED attached to digital pin 9 used to indicate a successful wireless connection

Video Tutorials

Schematics

FAQ

  • Diamondback on MacBook?
    • We have tested, and we need to stay with Arduino 0023, not the latest Arduino as the FDTI driver for Mac is not included in lastest version.

DIAMONDBACK-02.JPG