Infrared Receiver Module

From LinkSprite Playgound
Jump to: navigation, search


The Linker Infrared Receiver Module is used to receive infrared signals and also used for remote control detection. There is an IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter.

Infrared Receiver Module.jpg


Dimensions: 20.9×24.8×11.5mm

Net weight: 2.4g


IR receive dimension.jpg


Application Ideas

test <syntaxhighlight lang="c"> /*

* IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
* An IR detector/demodulator must be connected to the input RECV_PIN.
* Version 0.1 July, 2009
* Copyright 2009 Ken Shirriff
  1. include <IRremote.h>

int RECV_PIN = 11;

IRrecv irrecv(RECV_PIN);

decode_results results;

void setup() {

 irrecv.enableIRIn(); // Start the receiver


void loop() {

 if (irrecv.decode(&results)) {
   Serial.println(results.value, HEX);
   irrecv.resume(); // Receive the next value

} </syntaxhighlight>

Infrared Receiver module link.jpg