LinkSprite UHF RFID Reader Antenna (902-928MHz, 8dBi RHC Pol)
The antenna should be mounted permanently and securely on a mounting panel in accordance with all installation instructions.
For best results, point the antenna towards the center of the coverage area. A line-of-sight path between the antenna and active floor locations work best. Although signals in these bands penetrate interior walls with little attenuation, reinforced block walls, banks of metal cabinets, or steel shelving may attenuate signals or cause multipath, a condition where reflected signals interfere wit the primary signal path. Avoid mounting next to a column or vertical support that could a "shadow zone" of reduced coverage.
The antenna radiates a circularly polarized signal in a diretional pattern. Securely mount the antenna to a metal plate using the appropriate size nuts and locking hardware.
|Gain dBi||8.0 Nominal|
|Working Temperature||-40 degree C to 65 degree C|
|3 dB Horizonal Beamwidth||90 degree|
|3 dB Vertical Beamwidth||90 degree|
|Mounting||2 thresdded tuds (rack mount|
|Lighting Prorection||DC ground|
|Dimensionals mm||216 X 216 X 25 mm|
|Antenna Weight||1.2 kg|
- 1 x Antenna
- 1 x Male N-J to MMCX-J Interface Cable [RFID_CAB_MNJ2MMCXJ ]