Linker Mezzanine card for 96board

From LinkSprite Playgound
Jump to: navigation, search



Linker Mezzanine card is a shield breadout board designed for 96board. All the Linker kit modules can be plugged onto 96board through this card. There are bidirectional voltage-level translators which allows for low-voltage bidirectional translation between any of the 1.2-V,1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. So it compatibles with 3.3V or 5V module and make connecting peripheral more easily. You just plug a jumper onto JP9 to select which input voltage do you have. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on 96board. The ADC chip used is MCP3004. It talks to 96board using SPI interface.


  • 8 connecctors covering Analog, UART, I2C and GPIO
  • Two channels of analog input using MCP3004 ADC chip

Schematic diagram