Project LED Module

From LinkSprite Playgound
Jump to: navigation, search

<syntaxhighlight lang="c">


 based on Blink, Arduino's "Hello World!"
 Turns on an LED on for one second, then off for one second, repeatedly.
 The Tinkerkit Led Modules (T010110-7) is hooked up on O0

 This example code is in the public domain.
  1. define O0 11
  2. define O1 10
  3. define O2 9
  4. define O3 6
  5. define O4 5
  6. define O5 3
  7. define I0 A0
  8. define I1 A1
  9. define I2 A2
  10. define I3 A3
  11. define I4 A4
  12. define I5 A5

void setup() {

 // initialize the digital pin as an output.
 // Pin 13 has an LED connected on most Arduino boards:
 pinMode(O0, OUTPUT);     


void loop() {

 digitalWrite(O0, HIGH);   // set the LED on
 delay(1000);              // wait for a second
 digitalWrite(O0, LOW);    // set the LED off
 delay(1000);              // wait for a second