Difference between revisions of "RB-150CS: Servo with 360 Degree freedom"

From LinkSprite Playgound
Jump to: navigation, search
Line 1: Line 1:
Specifications:
+
[[File:RB_150CS_1.jpg]]
 +
 
 +
'''Specifications:'''
  
 
*Control System: +Pulse Width Control 1500usec Neutral
 
*Control System: +Pulse Width Control 1500usec Neutral

Revision as of 10:00, 11 November 2012

RB 150CS 1.jpg

Specifications:

  • Control System: +Pulse Width Control 1500usec Neutral
  • Operating Voltage: 4.8-7.2 Volts
  • Operating Temperature Range: 0 to +60 Degree
  • Operating Speed (4.8V): 0.16sec/60° at no load
  • Operating Speed (6V): 0.14sec/60° at no load
  • Operating Speed (7.2V): 0.12sec/60° at no load
  • Stall Torque:(4.8V): 3kg·cm ;(6.0V): 3.5kg·cm
  • Dead Band Width: 10usecConnector Wire Length: 300mm
  • Dimensions: 40.8mm X 20.1mm X 38mm
  • Weight: 56g
  • location of each pin: red (+),brown (-), yellow (signal)

Servo has three wires: Brown, Red and Orange. Brown is GND, Red is VCC, and should be connected to +5V, Orange is the control signal, which is PWM signal.

Note: Don't power your servo from USB port as USB port cannot provide enough current.