Rover: WiFi Video Streaming Robot

From LinkSprite Playgound
Revision as of 15:42, 12 February 2013 by Jingfeng (talk | contribs) (Hardware Installation)
Jump to: navigation, search

Introduction

Rover is LinkSprite's new robot platform. It has the main control board, an Arduino compatible core board, an USB camera, an ultrasonic sensor, and TL-WR703N WiFi router reflashed with OPENWRT firmware, and the basic mechanical platform. The mechanical control part is implemented on the Arduino compatible core board (this is included on the kit), while the video streaming part is implemented on the TL-WR703N Wifi router using OPENWRT. We provide the source files of Arduino, and the PC control software. Users can also learn OPENWRT using this platform.

Features

Application Ideas

Cautions

Schematic

Specification

Pin definition and Rating

Mechanic Dimensions

Usage

Hardware Installation

Control Board:

Rover controlboard.jpg

The Arduino control board on the Rover is "Arduino Diecimila or Duemilanove W/Atmea168", when you use Arduino IDE to select the board type.

Camera/Servo:

Camera servo.jpg

The servo platform has two part: up/down and left/right. Both directions can do 180 degree rotation. The USB camera is plugged into the WiFi module. Up/down servo connector is connected to pin 11 of the control board, and left/right servo connector is connected to pin 10 of the control board.

Ultrasonic Sensor:

Rover ultrasonic.jpg

The ultrasonic sensor is used to detect object and avoid collision. This sensor has 4 pins: 5V is connected to 5V pin of the control board; Trig is connected to pin 9 of the control board; Echo is connected to pin 9 of the control board. GND is connected to GND of the control board.

We didn't provide sample of how to use the ultrasonic sensor breakout included on the Rover kit. However, the user can find the information at here.

Mechanical Assembly Steps


Assemblystep 1.jpg

Assemblystep 2.jpg

Assemblystep 3.jpg

Assemblystep 4.jpg

Assemblystep 5.jpg

Assemblystep 6.jpg

Assemblystep 7.jpg

Assemblystep 8.jpg

Assemblystep 9.jpg

Assemblystep 10.jpg

Assemblystep 11 en.jpg

Programming

The Arduino control board on the Rover is "Arduino Diecimila or Duemilanove W/Atmea168".

FAQ

Please list your question here:


  • Hi. I want know which components are included in your package. Is included the Arduino board? Are included mechanical and electrical components. Is the board already assembled? Thanks for your responce.
    • It includes the Arduino compatible board, main servo control board, ultrasonic sensor, and the mechnical platform. But the batteries are NOT included.

Support

If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.

Resources

How to buy

See Also

Other related products and resources.

Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.