Web Cam 3-axis Servo Kit for Real Time Video for pcDuino

From LinkSprite Playgound
Revision as of 10:55, 15 May 2013 by Katherine.d (talk | contribs)
Jump to: navigation, search

Webcam servo kit.jpg


Description

This a kit that includes web cam, 2 mini servo, and a servo fixture to assemble a complete web cam servo as following:

Webcam assembly 1.jpg

Webcam assembly steps

  • Step 1. Take out the camera

Webcamass01.png

  • Step 2. Remove the pin

Webcamass02.png

Webcamass03.png

  • Step 3. Remove the screws from the bottom

Webcamass04.png

  • Step 4. In order to fixed camera and shelf. Drill a hole then fixed with screw

Webcamass05.png

Webcamass06.png

  • Step 5. Transform the camera shelf,cut off two flanks and plane the cut smoothly

Webcamass07.png

Webcamass08.png

Webcamass09.png

Webcamass10.png

  • Step 6. After transformation, aligned the shelf with the botton of camera, making a mark in order to drill the screw hole.

Webcamass11.png

Webcamass12.png

  • Step 7. To avoid covering the two screws on the bottom of camera, we need to drill two more hole on the flanks.

Webcamass13.png

Webcamass14.png

Webcamass15.png

  • Step 8. Now,fasten the camera on the shelf with screws.

Webcamass16.png

Webcamass17.png

  • Step 9. Install the camera,twist the screws.

Webcamass18.png

Webcamass19.png

  • Step 10. Install the Servo

Webcamass20.png

  • Step 11. Install the webcam stand,choose a properly hole. If the rocker arm is too long,cut off the unwanted parts. Fasten by the screw.

Webcamass21.png

Webcamass22.png

Webcamass23.png

  • Step 12. Disassembly the webcam stand, install another servo

Webcamass24.png

Webcamass25.png

Webcamass26.png

  • Step 13. Connect the camera and webcamstand

Webcamass27.png

  • Step 14. Trim the servo holder and install into the base panel.insert the stand into the base,fasten by screw.

Webcamass29.png

Webcamass28.png

Webcamass30.png

Webcamass31.png

Webcamass32.png